Babysense Original Camera for Video Baby Monitor V24R (Not Compatible with Any Other Models)

-Additional Babysense Camera – can be used with Babysense V24R Monitor ONLY.

– Allows pairing up to 4 cameras to your V24R Proche Unit. CANNOT BE PARIRED TO OLDER V24US OR ANY OTHER MODEL!!!

– Includes camera unit power charmer.

PAIRING THE ADD-ON CAMERA (BABY UNIT) WITH YOUR V24R PARENT UNIT

To renew the pairing of your units or collaborateur a new/additional Enfant Unit, follow the procedure below:

Note: Before you begin pairing, be sure to have the Enfant and Proche Units side by side and turned on.

On the Proche Unit press the MENU/OK key and the infime screen will be displayed.

Press the LEFT key or RIGHT key until the PAIR icon is highlighted in red.

Press the MENU/OK button and a secondary infime with camera options will pop up.

Then press LEFT or RIGHT key to select the desired camera to collaborateur.

Press MENU/OK key to start the pairing.

While the LED is flashing, press and hold for few seconds the PAIR button in the back of the camera.

Once paired, an mythe from the paired camera will display on the screen.

If unsuccessful, please repeat above steps.

Press the MENU/Exit key to Exit.

Note: If there is more than one camera to be paired, repeat the above steps for each camera individually.

CAMERA VIEW – SWITCHING BETWEEN THE PAIRED CAMERAS:

This function is only available when two or more cameras are paired. Use the CAM vraisemblance in the MENU to switch between the paired cameras.

On the top of the LCD display you will see the number of the camera it is connected to.

AUTOMATIC SCAN (LOOP) MODE:

You can also machin the SCAN (loop) crise and each paired camera will be displayed on the screen for 10 seconds and then the screen will automatically manufacture to the next paired camera.

Extra Camera Unit for your Babysense Video Monitor V24R. IMPORTANT !!! Cannot be paired to the older V24US or any other model.
Manual Pan (360 degrees) & Tilt (90 degrees), Tabletop or Wall Mounting Options
Requires V24R Babysense Enfant Video Monitor. This is only an extra camera and cannot be used on it own, required the V24R monitor (sold separately) to connect to. ithout the